Saturday, February 25, 2012

Electricity from radio frequency



Diagram explanation- This is a diagram to convert free radio wave signals into electric signals. This is adopted by connecting some inexpensive material as antenna wire, capacitor, led, diods and ground wire. The arrangement of connecting this electronic appliances are shown in the given figure.

Idea- The radio signals are freely available in air as series of flow of data. And if systematically analyzed the data may be considered as the binary signals in series , which produce variability in amplitude of the electromagnetic frequency. Thus when the radio frequency is cached by the antenna, it forms minute electron flow. This electricity is then converted into light by the led attached to the circuit.


Explanation- The radio signal which is cached by the antenna is in the form of alternate oscillation. The diods are attached for the main reason of rectifying the alternating current into direct current. This direct current and passed to the capacitor. Since while rectifying half of the amplitude is lost, an capacitor is installed to store few electric energy and drain it to the led during the time period of the missing wave. Thus a continuous energy supply is obtained by the capacitor. The electric signals is then utilized as producing light by the led, and the rest of the energy is drained out by grounding the negative terminal of the led diod.

Experimental observation-

Obtained voltage- 0.12v – 6.54 volt (without load, and open circuit)

Obtained voltage ( closed circuit) – 29v- 36v static (without load)

Obtained voltage( closed circuit)- 2.25v static (with load)

Obtained amps.- 0.11 A

Antenna wire length- 9 metre.

Expected development and utilization- with the increase in the antenna wire length, there is an extensive rise in the voltage and amps. Regardless to this experiment, the electricity obtained from the radio signals can be harvested into battery and can be used in different uses, where charging of battery prove to be hectic and there is an easy availability of radio signas. The apparatus can also be used in space craft, which need to power up its battery even when the sun sets and no working of the solar panels.

Saturday, October 9, 2010

Theory of sustainability

The Hypothesis
When a sudden extreme force is applied on a particle, that may have an effect to produce high velocity motion, try to tend the particle to change its form in a manner that may allow the particle to sustain that motion.
 Experiment:
Procedure:
An empty glass tank is taken. The tank is airtight sealed form the top with a minute hole at the center of the top lid.
To the one side wall of the tank is attached a vacuum pump to expel all inside air.
From one of the other side is installed an air gun to introduce air into the tank.
From the top and through the hole is installed the nozzle to supply oil at controlled rate by a nozzle controller.
Functioning:
First the tank is made airtight and vacuum pump is started to expel all air inside the tank.
Then the oil nozzle is opened to introduce oil into the tank drop by drop.
A little air blast is given to the oil droop by the air gun introduced into the tank.
Now the force of the air is gradually increased to obtain observation.
Observation:
At the beginning when the air valve is opened a little, it hardly has an effect on the oil drop. But as the speed of the air is increased gradually, there was a slight change in the observation and the oil droop started to fall down from the top in a little tilted manner. (I.e.: not falling perpendicularly from the top). But when the air blow is increased at highest rate, it is observed that the drop starts falling tilted and the original particles break to small-sized particles & a spray of oil droplets begin to form. This small sized particle then hits the ground.
 Explanation:
Thus when a small amount of force is given to the oil drop it doesn’t break into smaller particles since the high mass of the original oil particle is able to sustain the force applied to it. But as soon as high velocity force is applied on the oil drop, small oil droplet spray started to form as now at this time the high mass droplets is not capable of sustaining such motion and thus change of form takes place.
 Result:
Thus the experiment performed to obtain result is successfully accomplished and hence proved.

Property of sustainability of particles when acted upon by a moving force
1.     When a force is applied on a particle in a specified direction, the particle starts to move in the direction of the force and tries to acquire the velocity of the movement of force.
2.     The tendency of the particle to sustain and acquire the motion of the force last till the action of force persists into that particle.
3.     If the force applied on the particle last with the virtue that the particle can sustain that motion of force, the particle moves with same velocity as that of the velocity of force and ultimately comes to rest.
4.     If a greater force or force which can create high velocity motion to the particle is acted onto it, first the particle tries to undergo step-3. But in case the original particle cannot acquire sustainability, it breaks into fragments in such order that the fragments formed may sustain the motion of the force in that specified direction.
5.     If a high or extreme force is applied on that body/particle it undergoes by the step 3&4. But if still the applied force is greater and those formed fragments still cannot acquire sustainability, it result in breaking of the fragments into finer fragments.
6.     At stage when force is of order of producing high velocity motion equating to the limit of the velocity of light is acted on a particle, the particle itself changes its physical form into other nearest form of energy.
7.     Even at this situation when force is of such extreme order, the ultimate result may be change of mass into heat and light energy.
8.     At this stage this basic principle may mark the definition of light-“Light is nothing but a composition of minute energized particle which has its own mode of vibration or the original exhibition of character from which it was formed is totally lost and the only vibration probable by that particle would be the mode of vibration produced by the force which actually result in their formation.”

The above deduction of properties may be taken as true since it also satisfy the Einstein equation of mass and energy. (E=mc2)

Hypothesis on formation and life of universe

QUANTUM THEORY OF MOTION AT HIGH VELOCITY (Q.T.M.H.V)
When a body (composed of numerous particle) is brought under the effect of some kind of high velocity motion it leads to the breaking of the particles in some kind of (other form) energy, which is capable of sustaining such motion

ZERO SPOT (Z.S)
A zero spot may be defined as a point where no force are at play and may be taken as a Reference Frame (arbitrarily) to determine the motion of any object/particle with respect to it where zero spot is considered to be composed of zero motion or zero vibration or may be assumed as the absolute static point.
Zero spot is absolutely an arbitrary spot (since everything placed in the universe has got its own vibration) that may be placed anywhere in the universe according to the need and conditions. Zero spot may be assigned to posses’ temperature as unity.

MASSIVITY OF GLOBAL DESTRUCTION (M.G.D)
Introduction:
As its been believed, for a decade of time, solar system G21 is composed of a star commonly known as sun and its nine planets was assumed to be formed from the sun itself by the occurrence of super-nova explosion of sun (once in the form of singularity). The sun itself is also assumed to be formed from the early existence of a bigger singularity, which was actually responsible for the formation of our galactic masses and Milky Way.

EXPLANATION GIVEN BY SCIENTIST
From the time starting from Kepler till the genera of modern scientist, these theories is being proposed on the basic characteristic of the fundamental particles which made our galaxy and also the behavior and extent of massiveness they can take at times when exposed to varied situation.
Scientist are still in progress to find out more explanation of the fact that happened in around 13.6 billion light year ago, which marks the cosmic explosion of the singularity and formation of galaxy (BIG-BANG THEORY).
 THEORY TO SUSTAIN AND PROVE THE PROBABILITY OF FORMATION AND DESTRUCTION OF PLANETORY MASS BY THE OCCURRENCE OF “DOUBLE FLAP AND CONE FORMATION” (D.F.C)

Introduction
Observing the orientation of the earth (most favorable for observation) it could be some how be predicted its origin, manipulation of mass and density and the most important of all the beginning and death of it
 Observation based to find out the relative motion of the deferent portion of earth with respect to each other and the poles.
 These try leads to reveal and explore the most sensual fact which sums to be responsible for planetary motion about its axis.
  CONCEPT OF “D.F.C”
 Seeing and observing the land orientation in the northern and southern hemisphere of earth it can be observed that the two hemisphere is rotating in varied speed with respect to one another.
Eventually if the earth is seen from the top i.e. perpendicular to the North Pole the east-west rotation of the earth is seems to be in anticlockwise direction. Also if the same is been seen perpendicular to the South Pole the result is reversed i.e. the east-west rotation of the earth is seems to be in clockwise direction.
 This fact may be taken in consideration to justify the separation of landmasses form its first clustered form PANGAE to the modern separated form or the formation of different continental plates.
 The fact has also its impact on the movement across the globe and climatic shift and so on.
 Justification
The two hemisphere of earth is moving with the relative speed of one another. This can be only be possible if the earth itself has got some varied motion in different plates.
Since we know particle present on a moving body acquires the motion velocity and direction of the principle body.
Thus plates (placed on over the earth crust) itself has a varying motion and direction respect to one another.
…………………………………………….>>>>>>>>>>>>>>
Now as the earth has a great rotation about its axis so, there happens to produce two whirlpool-one in the North Pole and one in the South Pole. And also there is a formation of two cones inside and round the axis of the earth originating form the two whirlpools of both the pole. But it is interesting to note that these two cones formations are opposite in rotating direction.
It seems that after the formation of planets and the first turn it took to stabilize itself in the stable orbit, it is trying to pull apart the hemisphere towards the poles due to the effect of this cone formation in the axis. 
Thus in an after a decade of time, these hemispheres would be tear apart from the central equator region and may be swallowed by this whirlpool at the poles and hence to the center of the earth by the conical rotation.
This would result in impinging of matter one over the other at high velocity and great pressure.
At the time when all the land masses along with the hemispherical plates move to the whirlpool plane, two flaps of masses would produce two flaps – one at the north pole and one at the south pole –“DOUBLE FLAP” which would last for less than a second and result in the formation of great mass with high density at the center of the earth. 
Thus a very small volume with great masses and high density and havoc energy potential would be formed at the center of the earth. 
But this formation of high density masses with great potential cannot last for a longer time so eventually it would explode and burst into small fragments with the release of the excess energy according to the Einstein’s equation of mass and energy (E=MC2) 
The rest mass would be left as the burst fragments spread in the universe.
This would mark as the basic detail of planetary death rotating in a fixed axis and under the effect of gravitation pull by a larger body placed in its vicinity.

An apparatus To Measure The Relative Density And The Density Of A Liquid

Let M1, V1, D1 be the mass, volume, density of the standard liquid. and M2 V2 & D2 be the mass volume & density of the unknown liquid. Now as we know relative density (R.D)= D2/D1 OR RD= M2/V2/M1/V1. BUT AS IN THE APPARATUS, V1=V2 SO RD= M2/M1 THUS BY FINDING THE MASS OF THE TWO LIQUIDS HAVEING A CERTAIN VOLUME WE CAN FIND WE CAN FIND OUT THE RELATIVE DENSITY OF THE UNKNOWN LIQUID WITH RESPECT TO THE STANDARD LIQUID.
RD W.R.T WATER:-LET M1 V1 D1 BE THE MASS VOLUME & DENSITY OF WATER & M2 V2 D2 BE THE MASS VOLUME AND DENSITY OF THE LIQUID. THEREFORE RD=D2/D1 OR RD=D2 SINCE D1=1GM/CC SO RD=M2/V2. THUS BY FINDING THE RELARIVE DENSITY OF THAT LIQUID W.R.T. WATER WE COULD BE ABLE TO FIND OUT THE DENSITY OF THE UNKNOWN LIQUID

An apparatus To Measure The Relative Density And The Density Of A Liquid

Let M1, V1, D1 be the mass, volume, density of the standard liquid. and M2 V2 & D2 be the mass volume & density of the unknown liquid. Now as we know relative density (R.D)= D2/D1 OR RD= M2/V2/M1/V1. BUT AS IN THE APPARATUS, V1=V2 SO RD= M2/M1 THUS BY FINDING THE MASS OF THE TWO LIQUIDS HAVEING A CERTAIN VOLUME WE CAN FIND WE CAN FIND OUT THE RELATIVE DENSITY OF THE UNKNOWN LIQUID WITH RESPECT TO THE STANDARD LIQUID.
RD W.R.T WATER:-LET M1 V1 D1 BE THE MASS VOLUME & DENSITY OF WATER & M2 V2 D2 BE THE MASS VOLUME AND DENSITY OF THE LIQUID. THEREFORE RD=D2/D1 OR RD=D2 SINCE D1=1GM/CC SO RD=M2/V2. THUS BY FINDING THE RELARIVE DENSITY OF THAT LIQUID W.R.T. WATER WE COULD BE ABLE TO FIND OUT THE DENSITY OF THE UNKNOWN LIQUID